Bookbinding hot melt adhesive

Nowadays, ceramic tiles have become one of the indispensable home decoration materials in our home decoration. Tiles are needed in many places such as living room, bedroom, bathroom, etc. But how to choose wall glue? What glue is the most solid for wall tiles? Beautiful? I believe that many people are troubled. The small series of the decoration home network below will give you a brief introduction to what kind of glue is the most solid for the wall tiles !

What kind of glue is the strongest for wall tiles?

Deacetic acid type

The deacetic acid type wall has good transparency, quick vulcanization, and is relatively easy to release acetic acid when cured, and has a pungent odor, and it is highly corrosive to coated glass, metal and some inorganic materials.

2. dealcoholization

The dealcoholization type of wall glue has a small curing shrinkage rate and a low degree of water immersion. Most of the raw materials are also non-corrosive, and have poor adhesion to marble, steel and other materials; It is easy to form small bubbles and affect the quality of the tiles.

3. Deacidification

Deacidification type wall glue should not be used for cement and stone materials, because acid glue is easy to produce acetic acid, it is easy to react with the surface of alkaline materials such as cement and stone, and its expansion coefficient is very large. When it is too thin, the surface will wrinkle, affecting the overall aesthetics.

How to choose a firm wall glue

The wall glue has the advantages of high bonding strength, waterproof, antifreeze and anti-aging. It is now widely used in various interior and exterior walls, floors, bathrooms and kitchens. It is favored by many people! It is also convenient to use. It is quick and easy to replace the traditional cement yellow mortar. More importantly, its adhesive strength is several times that of traditional cement mortar. What glue is the most solid for wall tiles? How to choose cost-effective wall tiles Glue has become a hot topic in current home improvement.

1. Ordinary type wall tile glue: ordinary wall glue is more suitable for the fitting of small wall tiles.

2. Reinforced wall tile glue: The wall glue has strong pressure-resistant adhesive force and anti-drop force. It is suitable for wall and non-sand surface with large adhesive force. Its good adhesion strength is Many home furnishings are preferred.

3. Heavy brick type wall tile glue: What kind of glue is the most solid for wall tile? For the family with large adhesive requirements, the glue of heavy brick type has great strength, which is the first choice for wall glue. It also has good flexibility and can resist the stress caused by thermal expansion and contraction of the bonding layer. It is especially suitable for the bonding of various slate materials such as gypsum board, fiberboard, splint or old veneer. .

Xiao Bian summary: What kind of glue is the most solid for the wall tiles? After reading the above brief introduction to the wall stickers, do you have a better understanding of the wall glue? What kind of glue is the wall glue? How to choose a firm and beautiful wall tile glue, I think everyone knows it in mind. If you want to know more about decoration, please click to enter the decoration process section.