http://www.cb-adhesive.com
Home> Industry Information> Bookbinding hot melt adhesive

Bookbinding hot melt adhesive

March 27, 2019

Nowadays, the floor is generally glued. Whether it is tile or wood floor, the glue is used. The glue on the tile is better cleaned, but the glue on the floor is not so easy, so we have to think about it. The way to deal with it, then how to clean the glue on the floor? What are the buying skills of the floor glue? Next, let me introduce you to the small series of the decoration home network.


地板上的胶如何清理


First, how to clean the glue on the floor


1. Use hand cream. First tear off the printed surface, then squeeze the hand cream on it, slowly use your thumb to rub it, and then you can pick up the sticky glue, it is slower. Hand cream is a kind of oily substance, its nature is incompatible with glue. It is used in addition to glue.


2. Alcohol + Eraser can also be used, although this method is more tired, but the effect is good. You can take a piece of vinegar-covered rag to cover the entire area of the glue mark. After the glue is completely wet, you can easily remove it with a ruler. If you can, first soak it in water, then apply a little detergent, then use the old toothbrush to see the effect.


3. Use a cotton swab to wash the nail water or scrub the oil, and the glue marks can be removed. Use a special cleaner or sneakers to remove the stain. If it is a long-lasting and hardened trace, you can soften it with a hot towel and try the above.


地板上的胶如何清理


Second, how to buy floor glue


Smell

The quality is poor, the floor glue will have an unpleasant smell after opening, and some even have an unpleasant smell after a few days of construction. If the quality is good, there is only a faint smell. When the glue is transparent, the taste is almost complete. Disappeared, the eyes did not feel uncomfortable during the laying process, and the smell of glue could not be smelled completely after the laying.


2. Sticky

You can see the viscosity of the glue, generally around 1H. At this time, the viscosity of the transparent glue is large. As long as the glue is touched by hand, the glue is very sticky, and the finger does not stick to the finger after touching the glue surface. The inferior glue is weakly viscous, and after the finger leaves, a part sticks to the finger.


3. Look at the test report

If the quality of the floor glue is unqualified, this will have a great impact on the quality of the floor covering, and it will also affect the indoor air quality. Generally, the good glue has the environmental testing report of the formal channels of the country, so consumers are purchasing You can check the test report to see if it is environmentally friendly.


For those who lay the floor, they will always encounter the removal of the floor glue, then how to deal with the glue on the floor and the purchase skills of the floor glue, everyone who wants to know this knowledge also knows through the introduction of Xiaobian. Well, if you still want to know more about decoration, please continue to pay attention to the decoration home Internet cafe.


More related wonderful reading:

How to remove the glue on the floor? Floor glue

What is the use of floor glue?

The above is the Bookbinding hot melt adhesive we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Home> Industry Information> Bookbinding hot melt adhesive
Communicate with Supplier?Supplier
zhaowenhua Mr. zhaowenhua
What can I do for you?
Contact Supplier