http://www.cb-adhesive.com
Home> Industry Information> Bookbinding hot melt adhesive

Bookbinding hot melt adhesive

March 28, 2019

The feeling of wood flooring is warm and concise. Even if you walk barefoot on the wooden floor, you will feel cold, but in the process of laying the wood floor, you need to use glue to glue the floor. After the decoration, there will be some gum residue on the floor. This is unavoidable. How can the glue on the floor be cleaned up ? What method can be used to quickly remove the glue on the floor? Take a look.

How to clean up the glue on the floor

How to clear the glue on the floor? Alcohol is a very good thing, just use a tissue to get some alcohol to wipe the floor, and soon it will be clean.

How to clear the glue on the floor

If there is no industrial alcohol, the effect of using acetone is the same, and it is more convenient and effective. Drop a few drops directly on the floor, let it stand for a minute, and wipe it off on the rag.

How to clean up the glue on the floor 3. Remove with banana water

Banana water is also a very effective solvent for removing colloids. It is also very common, but be careful to wear plastic protective gloves.

How to clean up the glue on the floor 4. Clean it with nail polish

Nail polish is also used by our armor. Usually women will have it. Any nail polish can be used. It is the same as the method of dismantling nails. The tissue is wet and then covered with glue. Let it stand for three minutes. After wiping off on the line.

How to clean up the glue on the floor 5. Use hand cream to remove

You can remove it with a hand cream, squeeze some hand cream on the gum, and then slowly rub it with your thumb.

How to clear the rubber on the floor?

The oil inside the transformer is also a very good thing for removing glue. In particular, the glue that has already solidified is poured onto some of the insulating oil, and it is quickly removed after being softened.

How to clear the rubber on the floor?

How to clean up the glue on the floor? You can use wind oil to try, the effect of more alcohol should be similar.

How to clear the rubber on the floor?

You can bubble it for a while with gasoline, and then you can make it clean.

How to clear the rubber on the floor

It is also very easy to remove the glue after it is heated and softened with electric wind.

How to clean up the glue on the floor. 10. Remove with a utility knife

Can use the art blade to clear, be careful not to damage the floor, some of the residual glue can be scrubbed with a small amount of pine perfume or xylene dip cotton cloth.

How to clean up the rubber on the floor Eleven, erase with an eraser

Erasing can also remove the glue on the floor. It can be easily removed by slowly rubbing it along the edge.

How to clean up the rubber on the floor?

Take a piece of dry cloth stained with vinegar and cover the glue mark. After the glue is completely wet, it can be easily removed.

Editor's Note: The above is about the introduction of how to clear the glue on the floor , what methods can quickly remove the glue on the floor? Presumably after Xiao Bian's share we all have a solution to it, like the usual life will accidentally double Glue, 502, three-second glue, etc. can be used in these methods if they are not cleaned on the floor in time.

The above is the Bookbinding hot melt adhesive we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Home> Industry Information> Bookbinding hot melt adhesive
Communicate with Supplier?Supplier
zhaowenhua Mr. zhaowenhua
What can I do for you?
Contact Supplier