http://www.cb-adhesive.com
Home> Industry Information> Bookbinding hot melt adhesive

Bookbinding hot melt adhesive

April 22, 2019

Home renovation is a very troublesome thing. The decoration is not only a big deal, but also some small details. Some adhesives are used in the decoration. Among them, glass glue is the most commonly used. Glass glue is not only used when sticking glass, but also can be glued with some wood or stainless steel. The average person's use of glass glue is not particularly good, so how to play glass glue ? Here is a small series of decoration home to learn about the use of glass glue and precautions.


玻璃胶怎么打


How to fight glass glue


1. Use a lighter to bake the nozzle of the glass glue, and then knead the nozzle of the glass glue.


2, the nozzle of the glass glue, with a knife obliquely cut 45 degrees; point the glue nozzle to the position where you need to hit the glass glue.


3. Put the glass glue that has been screwed into the glue gun flat; press the switch behind the glue gun to push the bolt forward and fix the glass hose.


4. Pull the trigger of the glue gun firmly and fill the glue to the desired position.


Glass glue use method


1. Remove moisture, grease, dust and other contaminants from the surface of the joint. If necessary, clean the surface with a solvent (such as xylene or methyl ethyl ketone), and then wipe off any residue with a clean rag to make it fully clean and dry.


2. Cover the surface near the interface with plastic tape. To ensure that the sealed work lines are perfectly neat.


3. Cut the hose nozzle, install the tip tube, and cut it according to the size of the joint at a 45° angle.


4. Install the caulking gun and keep the rubber at the 45° angle along the gap to ensure that the rubber is in close contact with the surface of the substrate. When the seam width is greater than 15 mm, it is necessary to apply the glue repeatedly. After the glue is applied, the surface is trimmed with a knife to remove excess glue, and then the tape is torn off. If there is stain, it can be removed with a damp cloth.


5. The sealant is vulcanized after 10 minutes at room temperature. It takes 24 hours or more to completely vulcanize, depending on the thickness of the glue and the temperature and humidity of the environment.


玻璃胶怎么打


Glass glue tips


1. First of all, you will use a glass glue gun.


2. Determine the width of the glass glue you are using, which is the width of the gap.


3. Cut the nozzle into a smaller diameter than the gap according to the width of the gap in the glass.


4. Do a good job of protecting the two sides of the glass glue gap. Apply 2-3CM adhesive tape to the glass, profile and stone on both sides of the gap to protect the glass, profiles and stone on both sides. It has great convenience for correcting the glue inside the gap.


5. Master the speed of the glass glue and the speed of the glue gun movement, and move the glue gun evenly according to the depth of the gap.


6. Repair the glass glue area, find a blade to flatten the uneven area, and add glue to the place where the glue is not punched.


7. After 48 hours, the adhesive tape on both sides of the material can be removed to complete the construction.


玻璃胶怎么打


Glass glue use precautions


1. Use glass glue in a well-ventilated place. After use, be sure to open the window and keep it ventilated so that the harmful harmful gas can be emitted quickly.


2, to avoid contact with the skin to avoid the glass glue into the eyes, so when using the glass glue, cover with a protective cover to prevent the glass glue from entering the eyes.


3. When using glass glue, wear a mask to wear a mask when applying glass glue, so as to avoid harmful gas inhalation.


4, do not let children contact After using the glass glue, pay attention to the closure, placed in a place that children can not get.


The above content is how to play the glass glue brought to you by this small series? The introduction of the use of glass glue and the related matters, for your reference, I believe that after reading this article, we will have a certain understanding of how to use glass glue, I hope to provide the friends who need to use glass glue in the ongoing renovation. Some help. For more exciting home improvement content, please continue to pay attention to the decoration home network.


More related wonderful reading:

What is a glass glue gun? How to use a glass glue gun?

How to use glass glue is correct? Glass glue use method and precautions

What brand of glass glue is good? Glass glue top ten brand authority list

What are the differences between neutral glass glue and acid glass glue?

How to remove five small coups to help you with glass glue

How to wash the glass glue, three small coups tell you


The above is the Bookbinding hot melt adhesive we have listed for you. You can submit the following form to obtain more industry information we provide for you.

You can visit our website or contact us, and we will provide the latest consultation and solutions

Share to:

Send Inquiry

Home> Industry Information> Bookbinding hot melt adhesive
Communicate with Supplier?Supplier
zhaowenhua Mr. zhaowenhua
What can I do for you?
Contact Supplier