Bookbinding hot melt adhesive

[Asia pump network hearing] slurry pump, also known as pneumatic slurry pump, leather glue pump, hit material slurry pump, pneumatic pump, pneumatic piston pump, pumping material pump, pneumatic pump, pneumatic coating pump, Coating the pulp industry for the leather industry transport design. Now to introduce the use of glue pumps and maintenance. Glue pump First, the use of glue pump 1, first guide tube correctly into the barrel to be transported. 2, the corrosion-resistant hose connected to the discharge port connected to the feeding location. 3, the intake valve is closed, and then connect the gas source into the air valve connector, according to the required flow of slurry to open the intake valve to adjust the operating frequency of pneumatic slurry pump, you can work. Second, the glue pump maintenance 1, pneumatic slurry pump in the process of preventing cylinder parts to avoid deformation, resulting in piston stuck phenomenon, resulting in scrapped 2, the piston in the Bai Baiyi times after the operation, according to air compressor air supply process In the case of accumulation of water should be clear cylinder body, painted 30 # lubricants. 3, such as prolonged use should be working in the solvent cleaning, to prevent the slurry freezing, blocking the guide tube. 4, at work, such as the cylinder body heat (to feel hot subject), should immediately add 30 # lubricants. Further Reading: pump valve pipe fittings Exhibition 2016 Exhibition of Information Industry, Internet (Xiamen) Technology Co., Ltd. Author: Asian pumps Network Editor: Yao Xiaoxia (QQ / micro letter:) http://beng.liuti.cn/ (Hotline :)