Use scissors to cut foam glue, especially if you don't use scissors very easily. It's easy to cut the glue on the scissors. However, wiping the scissors is also very troublesome. If it is not easy to wipe it, it is easy to pull it out. Scuffing the scissors is a very dangerous action.
What if you experience offset printing on the scissors?
Solution: We need to use sunscreen instead of the lotion we normally use. Sunscreen is waterproof and protective. It is applied like a layer of film on our face to protect our skin. So when it comes to glue, first of all we use its water resistance and it is not easy to absorb. Then we touch the sunscreen on the scissors with the offset, touch it slightly, and then we start with this scissors. Paper cut (A4 paper), cut back and forth several times. In fact, in the process of cutting, you will also have experience: foam adhesive has been down from the scissors a lot. At this time, we removed these glues, and then we added sunscreen. Sunscreen was relatively weak. We can also stack a few layers of A4 paper, cut a little thicker. In the case of a little bit of shearing, we can put more force between the scissors. During the cutting process, we will find that the glue has been pushed to the edge of the scissors. It is easy to drop the glue by hand. . If you are afraid to get your hands, you can use paper to take the glue down.
June 22, 2019
