Bookbinding hot melt adhesive

Recently I heard that business friends from all parts of the country reacted. Gansu wall cloth wholesale often encountered seamless wall covering in the construction of plastic glue. I do not know how to deal with it. The first reaction was that the manufacturer's product had quality problems and asked the manufacturer to deal with it. It was not so. thing. Gansu wall cloth wholesale will appear this problem, in fact, these are all rookie master, or the legendary white caused.
If the wall cloth is slightly transparent, the master can handle it in a timely manner (sponge with wet sponge and dry with a cold hair dryer). Gansu wall cloth wholesale but penetrating more serious, basically difficult to deal with, we should learn how to use professional construction techniques to avoid penetration, after the remedy is the next step!
The reason why the glue is too thin is that everyone should understand it well: the glue is too thin, and the glue in the glue will penetrate through the composite layer and appear on the surface of the wall cloth.
The reason why the glue brush is too thick is also better understood: When the glue concentration is moderate, too much glue can cause unevenness on the wall. At this time, the inexperienced construction master will generally squeeze the glue to the edge in order to level. In the process, the glue was squeezed in the process, and through the wall cloth, problems appeared.
Inappropriate use of tools: Scraper This is the cause of most of the problems of the glue penetration: In the actual construction, the glued wall cannot be completely in the theoretical state, so the glue is more or less in the case of a moderate concentration of glue, in the wall There will still be extra glue on it. The tools used by Gansu Wallcloth wholesale at this time are very important. When the scraper vigorously accumulates the wall cloth, the phenomenon of glue penetration occurs.
The main reason for this problem is that it is time-consuming to put on the wall and the irresistible construction of the wall is due to the high construction requirements, or the problem of glue penetration in the finer wall coverings. Patience is especially important when there are no problems with glue and tools. When the glue is just on the wall and the moisture is still too large, the inexperienced construction master will choose to immediately put the wall cloth on the wall in order to receive the construction cost as soon as possible. At this time, a type of wall cloth like high-precision will have problems with penetration. !