The main unit and the hot melt hose are connected by a joint, and for some reasons, leakage may occur. This phenomenon is an abnormal phenomenon, which will affect the use of the entire set of hot melt machines. When this phenomenon occurs, it should be stopped immediately for maintenance.
If the glue is leaking somewhere in the hot melt hose, it may be that the hose bursts. In this case, the new hot melt hose is re-purchased. If it is leaking at the joint between the main unit and the hose, it is much easier. It may be that it is not tightened during installation. Just tighten it with a wrench and pay attention to wearing protective gloves. It may be over-tightened, causing leakage of the joint thread. Glue, replace the joints; it may be that the joints are aging, they are automatically loosened, they cannot be tightened, and only the joints need to be replaced. Another thing to remind everyone is to turn off the power and take protective measures when overhauling.
Small problems will also affect the normal use of hot melt machinery and need to be resolved in time. If you have any questions, please feel free to contact the manufacturer of Nuosheng Hot Melt Adhesive Machine to give you professional technical guidance!
November 28, 2018
