How to wash glass glue? What are the methods of using glass glue?

There are many places where the glass will be installed. The general building will be installed. However, the glass installation requires glass glue, but in the process of using it, the glass glue may be put in other places. Need us to clean, then how to wash the glass glue? What are the precautions for the use of glass glue? If you want to know more about the decoration of the home network, let's take a look.

First, how to wash glass glue?

1. Use cotton or cloth to vinegar, and then apply the soaked cotton or cloth to the glue on the glass to cover the traces of the glue on the whole glass, compared to the glue on the glass. After soaking, we can use a knife or a pot of yarn to gradually remove the glue a little.

2. There is a glass glue that has already been cured. This glass glue is extremely difficult to remove. If the cured glass is attached to glass, ceramics, metal, etc., it can be considered to be scrubbed with a solvent such as xylene or acetone.

3. Use a blower to blow soften the glue on the glass. When the adhesion of the glue on the glass becomes weak, it can be easily removed. If there is still a small trace, use a shovel to remove the light water to scrub. Wipe the glue on the glass with an organic solvent or industrial alcohol, or a high concentration of alcohol. Pay attention to rubbing with a rag, don't touch it directly with water.

Second, the use of glass glue

1. Wipe the surface of the metal and plastic completely, remove the oil, and then rinse the entire surface with acetone except the plastic. The rubber surface is sanded with a sandpaper and then rubbed with acetone. Observe the precautions when using this solvent when using acetone.

2. Ordinary glass glue should be formed by the participation of moisture in the air. Except for special and special purpose glass glue (such as anaerobic glue), if the place to be constructed is confined and dry, ordinary glass Glue will not be able to do the job.

3. The problem with glass glue is that it is black mold. Even if it is made of waterproof glass glue or mildew glass glue, it can not completely avoid such problems. Therefore, it is not suitable for construction where water or water is immersed for a long time.

4. Spread the glass glue evenly on the surface of the prepared object. If you are bonding the two surfaces, you can place the surface first and then squeeze the other side with enough force to squeeze out the air, but pay attention to it. Do not squeeze out the glass glue. The bonded device is placed at room temperature until the glass glue is cured.

There are many places where glass glue will be used. As long as there is glass installation, how to wash glass glue and how to use it, I think you can understand these through the introduction of the above small series. Then if you still want to know more about decoration, please continue to pay attention to the decoration home Internet cafe.

More related wonderful reading:

How to wash glass glue, precautions for glass glue cleaning

How to wash the glass glue, three small coups tell you