Toilet waterproof glue construction method explains how long waterproof glue needs to dry

We all know that the bathroom is a relatively humid place, so the glue is generally used to waterproof, to know that waterproof plastic has a high flexibility, strong adhesion, simple construction, impermeability and other advantages. The following Xiao Bian will give you a brief introduction to the construction method of the bathroom Waterproof Glue and how long it will take for the waterproof glue to dry.

Toilet waterproof glue construction method explanation

1, one-component brushing construction

Waterproof adhesive can be used directly for brushing, because it has good flexibility and tensile strength, especially suitable for cracks, nozzles, sinks and other easily deformable parts. During construction, it is also divided into 2 to 3 paintings. Each construction interval must wait for one dry before the next construction. For special parts such as corners, through-wall pipes, vents, and sinks, additional glass fiber cloths can be used as reinforcements as required.

2, spraying construction

Before use, the base surface should be cleaned thoroughly, with large cracks and holes repaired with anti-seepage sealing agent. The nano-silicon waterproof glue plus 6 ~ 8 times water and stir evenly, with a sprayer directly on the dry base surface construction, per kilogram diluted after each time can be about 30 ~ 40m2, in general, is the aspect of at least two times (first After the construction, the sticky construction is repeated for the second time.) For the 1:2.5 rough surface of the standard mortar, the construction can be permeated with 0.5mm depth for two times. This life can reach 3 to 5 years. Within 24 hours after construction, it shall not be flooded by rain, and construction shall be stopped below 5°C. After drying at room temperature, there is a good waterproof effect. The spraying construction is particularly suitable for controlling the leakage of the outer wall. After dried and filmed, it is colorless and transparent and basically does not affect the appearance of the building.

3, two-component brushing construction

Waterproof adhesive and ordinary Portland cement composite, can be used as JS composite waterproof coating, its excellent waterproof performance, strong adhesion, good elasticity, and the cost is relatively low. The proportion of preparation is nano-silica waterproof glue: cement = 1:1~2. If it feels thicker during construction, it can be diluted with appropriate amount of water. Use mechanical agitation as much as possible, and manual agitation must be sufficient. Otherwise, it is easy to cause construction defects such as dust and bubbles. The construction is divided into 3 to 5 times of construction, and each time construction is dry and sticky, the construction will be carried out the next time.

How long does it take for the waterproof glue to dry

1. Properly open a window that does not directly dry the top of the wall and ventilate it.

2. Use a container such as a basin or a small bucket to fill with cold water, then add the appropriate amount of vinegar to the ventilation room and open the furniture door. Doing so can evaporate water to protect the top surface of the wall, and it can also absorb and remove residual odor.

3, if economic conditions allow, you can buy some pineapple put in each room a few, if it is a big room can put some more. Because pineapple is a kind of rough fiber fruit, it can not only absorb the smell of paint, but also can reach the flavor of the pineapple and speed up the removal of odor. This can also achieve the best of both worlds.

Summary: About the construction method of the waterproof glue of the bathroom and how long it takes for the waterproof glue to dry before the related content is introduced. Here, we recommend three kinds of methods for the construction of the waterproof glue for the bathroom . You can refer to it during the construction and the waterproof glue must wait. It can only be done later after it is dry.